opus_defines.h File Reference

Opus reference implementation constants. More...

#include "opus_types.h"

Go to the source code of this file.

Defines
#define	OPUS_OK
	No error.
#define	OPUS_BAD_ARG
	One or more invalid/out of range arguments.
#define	OPUS_BUFFER_TOO_SMALL
	The mode struct passed is invalid.
#define	OPUS_INTERNAL_ERROR
	An internal error was detected.
#define	OPUS_INVALID_PACKET
	The compressed data passed is corrupted.
#define	OPUS_UNIMPLEMENTED
	Invalid/unsupported request number.
#define	OPUS_INVALID_STATE
	An encoder or decoder structure is invalid or already freed.
#define	OPUS_ALLOC_FAIL
	Memory allocation has failed.
#define	OPUS_AUTO
	Auto/default setting.
#define	OPUS_BITRATE_MAX
	Maximum bitrate.
#define	OPUS_APPLICATION_VOIP
	Best for most VoIP/videoconference applications where listening quality and intelligibility matter most.
#define	OPUS_APPLICATION_AUDIO
	Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input.
#define	OPUS_APPLICATION_RESTRICTED_LOWDELAY
	Only use when lowest-achievable latency is what matters most.
#define	OPUS_SIGNAL_VOICE   3001
	Signal being encoded is voice.
#define	OPUS_SIGNAL_MUSIC   3002
	Signal being encoded is music.
#define	OPUS_BANDWIDTH_NARROWBAND
	4kHz bandpass
#define	OPUS_BANDWIDTH_MEDIUMBAND
	6kHz bandpass
#define	OPUS_BANDWIDTH_WIDEBAND
	8kHz bandpass
#define	OPUS_BANDWIDTH_SUPERWIDEBAND
	12kHz bandpass
#define	OPUS_BANDWIDTH_FULLBAND
	20kHz bandpass
#define	OPUS_SET_COMPLEXITY(x)
	Configures the encoder's computational complexity.
#define	OPUS_GET_COMPLEXITY(x)
	Gets the encoder's complexity configuration,.
#define	OPUS_SET_BITRATE(x)
	Configures the bitrate in the encoder.
#define	OPUS_GET_BITRATE(x)
	Gets the encoder's bitrate configuration,.
#define	OPUS_SET_VBR(x)
	Configures VBR in the encoder.
#define	OPUS_GET_VBR(x)
	Gets the encoder's VBR configuration,.
#define	OPUS_SET_VBR_CONSTRAINT(x)
	Configures constrained VBR in the encoder.
#define	OPUS_GET_VBR_CONSTRAINT(x)
	Gets the encoder's constrained VBR configuration.
#define	OPUS_SET_FORCE_CHANNELS(x)
	Configures mono/stereo forcing in the encoder.
#define	OPUS_GET_FORCE_CHANNELS(x)
	Gets the encoder's forced channel configuration,.
#define	OPUS_SET_MAX_BANDWIDTH(x)
	Configures the encoder's maximum bandpass allowed,.
#define	OPUS_GET_MAX_BANDWIDTH(x)
	Gets the encoder's configured maximum bandpass allowed,.
#define	OPUS_SET_BANDWIDTH(x)
	Configures the encoder's bandpass,.
#define	OPUS_SET_SIGNAL(x)
	Configures the type of signal being encoded.
#define	OPUS_GET_SIGNAL(x)
	Gets the encoder's configured signal type,.
#define	OPUS_SET_APPLICATION(x)
	Configures the encoder's intended application.
#define	OPUS_GET_APPLICATION(x)
	Gets the encoder's configured application,.
#define	OPUS_GET_LOOKAHEAD(x)
	Gets the total samples of delay added by the entire codec.
#define	OPUS_SET_INBAND_FEC(x)
	Configures the encoder's use of inband forward error correction.
#define	OPUS_GET_INBAND_FEC(x)
	Gets encoder's configured use of inband forward error correction,.
#define	OPUS_SET_PACKET_LOSS_PERC(x)
	Configures the encoder's expected packet loss percentage.
#define	OPUS_GET_PACKET_LOSS_PERC(x)
	Gets the encoder's configured packet loss percentage,.
#define	OPUS_SET_DTX(x)
	Configures the encoder's use of discontinuous transmission.
#define	OPUS_GET_DTX(x)
	Gets encoder's configured use of discontinuous transmission,.
#define	OPUS_RESET_STATE
	Resets the codec state to be equivalent to a freshly initialized state.
#define	OPUS_GET_FINAL_RANGE(x)
	Gets the final state of the codec's entropy coder.
#define	OPUS_GET_PITCH(x)
	Gets the pitch of the last decoded frame, if available.
#define	OPUS_GET_BANDWIDTH(x)
	Gets the encoder's configured bandpass or the decoder's last bandpass,.
Functions
const char *	opus_strerror (int error)
	Converts an opus error code into a human readable string.
const char *	opus_get_version_string (void)
	Gets the libopus version string.

---

Detailed Description

Opus reference implementation constants.